• Sourcing Solutions
  • Services & Membership
  • Help & Community

Quick Details

  • Condition: New
  • Place of Origin: Henan, China (Mainland)
  • Brand Name: YYTF
  • Model Number: GQ40A
  • Voltage: 380V
  • Rated Power: 3KW-3phase
  • Dimension(L*W*H): 1250*500*730mm
  • Weight: 395
  • Certification: ISO9001:2008
  • Warranty: 1 year
  • After-sales Service Provided: Engineers available to service machinery overseas
  • Cutting Frequency: 32times/min
  • Color: as you like
  • Cutting mode: GQ40
  • Cutting thickness: 0-40mm
  • Cutting material: steel bar
  • Power: 3kw
  • Working voltage: AC220V/380V-50Hz
  • Usage: rebar cutting
  • Name: GQ40A reinforcing steel wire cutter
  • warranty: 1 year

Packaging & Delivery

Packaging Details GQ40A reinforcing steel wire cutter is packed by wooden cover with iron shelf
Delivery Time Shipped in 15 days after payment


steel bar cutting machine rebar cutting machine GQ40


   Product Description  


GQ40 Rebar Cutting Machine, is manufactured according to JG/T5085—1996 standard, is applicable to ordinary carbon steel, Hot-rolled steel and corrugated rebar in reinforced concrete. It can also cut flat steel, angle steel and square steel provided with special blades. GQ40 has the following features:


1.Compact structure, solid and reliable


2.Good lubricating properties. Adopt closed structure, use Gear Splash lubrication, fill in 8-12kgs oil, the machine could work continuously for more than 3 month (oil level not lower than the oil calibration, so that make sure the machine is in well lubrication condition)


3.Low power consumption. The gear uses rolling bearing, low resistance, could save 1/3 power comparing with other rebar cutting machines




1,Steel Bar Cutting Machine, Reinforcing Rebar Cutter. Construction Cut Tool, Steel Wire Cutter, Made in China


2,12 Months Crucial Parts Guarantee.


3,Low Noise, Durable, Easy To Maintain,High Speed , Efficiency, Accuracy, Good Quality


4,Providing Technical Guidance And Operating Training And Best After Service.

can be used to cut ordinary carbon steel,heat rolling steel,screw thread steel,flat steel,

square steel and angle iron on machine processing and construction projects.


1:Enhanced machine frame with smaller cubage,better configuration and more stability;

movable truckles have more agility on relocation.


2:It has better lubrication function by adopting occluded grease-box and gear splash

lubrication ,which can work continuously for more than 3 months with one -time oil filling,8-12KG.


3:It has high power utility due to the big improvement of lubrication conditions .it takes rolling

axletree at gear wheel to lower the resistance and has one third better performance than other

similar cutting machine.




This machine is used to steel bar(steel rod) rebar cutting. It’s convenience to put in construction sites and steel bar processing sites. Best quality Reinforced enclosure, compact structure, movable wheels, low power loss. High hardness blade base and connection rod, using high speed standard motor, high quality and steady performance, long service life. All gear shafts are produced by our own CNC processing center, make sure high accuracy of size and excellent quality. The machine is extra thick and hard, high quality can work in the heavy duty.



Cutting CapacitySteel Rod≤ø40mm GQ50 
II Rebar≤ø32mm
Max Flat Steel70*15mm
Max Square Steel32*32mm
Max Angle Steel50*50mm
Cutting Frequency32times/min
Motor Power3kw(3 Phase)V
Optional Motor220v/415v/440vV


As the transmission figure shows: Motor 1 via V-belt drive the large pulley 2 to make it turn, the even shaft gear 3 mesh the gear 4, II axis even shaft gear 9 mesh the III axis gear 10, III axis even shaft gear 5 mesh the swimming gear 6, the torque transmitted to crankshaft drive the connecting rod 12 to push movable knife seat 13 to cut.




    Safe ty Precautions  


Preparation before operating


1. Move the large pulley, check if the gears mesh well.


2. Check if the knives are installed tightly. The distance between two knives should be at 0.2mm to 0.5mm / 0.2mm to 0.8mm in level


3. Check if all screws are tight (7 /8 screws in side cover should be checked frequently)


4. Check if the appliance is normal; make sure the insulation is well. Make sure to use 3phase 4-wire grounding. After grounding, test and make sure the turning direction of the large pulley is same with the mark in cover.


5. Fill in oil before operating a new machine. Open the screw in upper cover and find the oil hole, fill in 8kgs to 10 kgs gear oil N150-220#


6. Test the machine without loading steel, stop immediately when there is any anomalies.


Precautions During Operating


1 Make sure the steel is cut by the lower part (lower than middle) of the knives, please don’t cut steel by the upper part so as to prevent fatigue to the tail part of the machine.


2 Check if the knives are loose while working. Exchange cutting position of the blade or replace with a new knife when the knife is crack.


3. Usage of Clutch Pedal


4.Put the steel in position; put the iron block touch close to the steel, press the clutch pedal to cut steel. The machine would cut 1 time if you press once.

Don’t keep pressing clutch pedal for more than 2 seconds, or the knives would keep cutting continuously.

Press the clutch pedal to full extent. Frequently in-adequate press would lead to short life of the clutch pedal.


5. To keep continuous cutting, tension the M8 screw to pull out the stop pin.


6. Take out the pad inside the fixed knife, replace with angle knife, the machine can cut angle steel (angle knife must be customized)


    Maintenance and Lubrication   


1.Clean dust, debris and rust in time.


2.Check if there is enough oil frequently.


3.Disassemble the motor if not use the machine for long time.


4.For a new machine, change oil after using for 1 month. 6 months later add grease to bearings


    Quick-wear Parts   





Fixed knife


Movable knife


Bakelite board


40*65*12oil seal


Clutch pressure springs


Clutch Spring


Powder tile with platform


Powder tile without platform


Copper brush




Appliance (including button switch)





    Quality Control   


At Fengyida Machinery Manufacturing, we offer quality products that are subjected to rigorous quality testing measures to ensure that only the best products in terms of quality and design reaches the market. We believe that our clients deal with us because of the quality that we provide and are fully aware of our responsibilities of catering to the various needs and requirements in this regard. We have adopted a system of total quality control to ensure that our products conform to strict industry standards and parameters. We use the quality imported parts and materials that are procured from reputed manufacturers. In addition, the different stages of production are closely monitored by our engineers to ensure complete satisfaction of the user of our products.



if quality problems cause the user to fail to use the machine, after repair the user still fails to use the machine. We promise to replace the machine with new one after the machine is sold within one month. The expenses generated hereof shall be borne by manufacturer (subject to effective bill). Components and parts (non-consumable parts) are under replacement and warranty within 3 months. If the whole machine suffers major quality problems such as engine body, box, and gear fracture, the warranty period is 6 months. If quick-wear parts of the machine listed in the below table have problems, the quick-wear parts are not in scope of three guarantees. (Remark: effective period is subject to date of invoice.)





Why Choose YongYiTongFeng?

YongYiTongFeng has:


Quality Advantage

Fast cost recovery. The High quality but Mid-range price, durable quality brings you continuous profits.

Category Advantage

We provide full category of cutting machine, bending machine, straightening machine, stirrup machine, bend-cutting combined machine.

Service Advantage

We have after sales center in all around China, assures the quick reaction and solve problem at first time.  Overseas after sales service available, workers could be sent to install machine and train your workers.

Technique Advantage

All machines are Fool-Type operation, new users could operate machine in few minutes.

Delivery Advantage

We set logistic center in large cities in China, assures you get machines at first time.



Company Information

We are professional rebar equipment manufacturer (for 17 years) locates at Xuchang city which is china largest rebar equipment manufacturing district.

With the company’s development and growth, Xuchang FengYiDa Machinery Manufacturing Co.,Ltd invested RMB150,000,000.00 to build a modernized new factory in Shangji Industrial Park, Xuchang City, Henan Province.The new factory covers 33000 square meters, has a 5-floor independent office building, combining R&D, purchasing, finance, administration, Sales, Exhibiting, receiption together.We are not only able to process our own machine parts, but also able to accept OEM orders and process customized parts for overseas customers.40000 sets machine were made and sold in China and to all over the world,we sincerely hope to establish business relations with your esteemed corporation.

Transaction History of the Supplier

Below is the information about the supplier's transactions conducted via Alibaba.com. If you require further details regarding the transaction data, please contact the supplier directly.

Transaction Overview


Transaction Details

This supplier has completedtransactions with buyers from .

Shipping Destination
Transaction Value
Transaction Date
Email to this supplier
The supplier supports Trade Assurance – A free service that protects your orders from payment to delivery.
Supplier's Trade Assurance Limit: US $48,000
Learn More